Spray dryer powder hardening

Spray dryer powder hardening device: The dry solids resulting from the drying of various solutions in the spray dryer are usually very light and low density due to the dilution of the solutions after drying, the reason for this being the removal of water from the falling drop in the spray. Dryer and emptying the total volume of the drop of water or liquid to be dried. The result of this is that the product is very light and bulky, causing problems in packaging and increasing shipping costs.

To solve this problem, some production units use hammer mills, which partially solves this problem. But to completely solve this problem, a spray dryer powder hardening device is used, which by creating friction between the particles, causes complete crushing and increases the density of the particles. These devices are made in one, two and three stages depending on the lightness of the raw material. This device is used to reduce the volume of sulfates such as manganese sulfate, zinc sulfate, and magnesium sulfate, as well as the raw material of ceramic and tile glaze.

Hamun Industrial Group, a manufacturer of all kinds of industrial machines, is ready to design and manufacture all kinds of powder hardening machines for the country’s artisans and manufacturers. In many cases, the devices made by this group have been able to reduce the volume of the produced material to one-eighth of the original amount, thus significantly reducing bag consumption and transportation costs.

Manufacturer and producer of all kinds of chemicals and industrial machines (spray dryers, rotary kilns, filters), the most suitable prices and the best quality performance.